titoshee Posted September 16, 2007 Report Posted September 16, 2007 I TOOK OFF THE OLD ONE AND I DONTKNOW HOW TO PUT THE NEW BACK PLEASE SOMEBODY HELP ME Quote
dajogejr Posted September 17, 2007 Report Posted September 17, 2007 I TOOK OFF THE OLD ONE AND I DONTKNOW HOW TO PUT THE NEW BACK PLEASE SOMEBODY HELP ME First, turn the caps lock off....it's the equivalent of shouting on the Internet. It's kinda hard to explain, but if you pick up a clymers manual...it will show you with pictures. I'll try... Take the carb cap, compress the spring and put the cable through the middle. The little tower in the slide has an open side...slide the cable end into that..and pull up to secure it. While still holding the spring, there is a ushaped retainer, the notch on the retainer goes over the top of the tower, once in place and seated, release the spring and it will hold the retainer down. If I just read all that...and didn't know what I was doing...that would still confuse the hell out of me.... I don't know how to explain it any better without pictures....good luck!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.