greg_banshee Posted July 15, 2007 Report Posted July 15, 2007 the fella's from Nova Scotia up for a HQ ride ? i'm game for anywhere as long as its not 150$ a night at a frickin hotel lol or i know a great pit to ride at. msg me ! Quote
Fireroad Express Posted July 15, 2007 Report Posted July 15, 2007 (edited) hell ya! sounds like a good plan. where and when were you planning on holding the ride? i still got a bit of work to do to the bike, but it should be ready soon. waiting on a bolt kit(stainless) but it may have to go back together without the fancy bolts! Edited July 15, 2007 by the grinch Quote
Fireroad Express Posted July 15, 2007 Report Posted July 15, 2007 oh ya, you wouldn't happen to have a spare dowel pin for the cases kicking around some where?also looking for the adjustment screw for the shift linkage shaft(the one that looks like its bent). this is all i need to get the engine back together. Quote
greg_banshee Posted July 16, 2007 Author Report Posted July 16, 2007 hey yeah i might have a dowel pin if not i can get you one where are you located ? i don't really know what your talkin about for the other part ? ? pic ? Quote
greg_banshee Posted July 16, 2007 Author Report Posted July 16, 2007 oh ya & as far as where & when ? ... i was thinking 6 Mile Brook, sweet gravel pit lots of room to play & lots of dirt roads to run wide open, big hill face to climb ?? anyone else have any other suggestions ? Quote
Fireroad Express Posted July 16, 2007 Report Posted July 16, 2007 hey yeah i might have a dowel pin if not i can get you one where are you located ? i don't really know what your talkin about for the other part ? ? pic ? i'm located in brookfield, just outside truro.i'll take the dowel pin if you got it. i will post a pic of the adjustment screw tonight. 6 mile brook sounds good to me. used to go 4 wheel'in there quite abit. Quote
Fireroad Express Posted July 17, 2007 Report Posted July 17, 2007 pics of where the adjustment screw is situated. it goes right between the two spring ends inside the slot. Quote
greg_banshee Posted July 17, 2007 Author Report Posted July 17, 2007 Hey man yeah no i don't have either if you know what size the dowel pin is i can get one at work n/p ... if i recall its either 4 or 5mm dowel pin eh ? let me know i'm workin 3:30-12 this week so just leave a msg & i'll see what i can do ! Quote
Fireroad Express Posted July 18, 2007 Report Posted July 18, 2007 found some parts! should be here next week! hope its run'in soon. Quote
spike Posted July 18, 2007 Report Posted July 18, 2007 i'd be up for it too, I live up in the valley, where is 6 miles brook located? Quote
Fireroad Express Posted July 18, 2007 Report Posted July 18, 2007 6 mile brook is in pictou county. its before you get to new glasgow near west river . Quote
greg_banshee Posted July 18, 2007 Author Report Posted July 18, 2007 Yeah lets hope your up & running soon ! yeah the Salts Springs turn off is where we could meet then the pit is just 5 minutes down the road. need anything else "the grinch" ? i have lots of extra parts Quote
Fireroad Express Posted July 18, 2007 Report Posted July 18, 2007 i'm sure that something else will go missing before i get finished! Quote
greg_banshee Posted July 19, 2007 Author Report Posted July 19, 2007 alright well get er together & we'll plan a day to get to the Pit anybody else live in NS ? must be more then 3 of us ? Quote
Fireroad Express Posted July 22, 2007 Report Posted July 22, 2007 (edited) should post something at one of the dealerships(adventure motors) about a banshee run at the pit in six mile brook. might get a few more people out there. i know theres a few fellas on here from N.B. but thats quite a haul for one day of running. i'm almost ready except for the adjustment screw i'm waiting for. should be here on tuesday. just need to do a bit of jetting and a few other adjustments and i'm good to go. Edited July 22, 2007 by the grinch Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.