38 mm carb with cpi

[evoorng]

ok, i just put in a 5 mil long rod 4 mil str cub in my banshee and i put a set of 38mm muk carb. does anyone know if cpi pipes will hit the carbs, cause my t5s do.

[fastbanshee8]

The CPI's will hit the carbs even more. I used to run FMF Fatty's, and my FMF's hit the 34mm Mikuni's, but just barely. Now I have CPI's, and the CPI's hit the carbs worse than the FMF's did. I ended up having to put some spacers between the frame, and the pipe mounts, to gain a little bit of clearance.

[Ducman]

My 34mm Mikunis clear my Rockets and they are shaped similar to CPI. I have the chosen performance pipe seals and they come close to the carb on the left side but still clear.