what jets to run

[pennywise007]

stock carbs, boyesen reeds, and tors eliminator kit on, with idle kit installed, engine is bored .020 over. also i have k&n pod air filters with outerwears, so there is no air box. and i have toomey t4s. i ride near sea level and in 60-90 degree temp.

 

i was just wondering what jets to start with? thank you

Edited June 15, 2007 by pennywise007

[dajogejr]

I can't see T4 jetting being off that far from T5.

This will be close.

 

340 main, needle middle clip, 27.5 pilots, 1.0 to 2.0 turns out.

 

That's the jetting I ran in my stock motor T5'd bike...same mods.