Jump to content

Recommended Posts

Posted

i recently just re-rung my banshee and before i did that it ran perfectly and started easily. since then it wont kick start but if i roll start it, it will fire right up. after it get warmed up it will start, but if i let it sit a while then i have to roll start it again. anyone have any suggestions?? help me

Posted
i recently just re-rung my banshee and before i did that it ran perfectly and started easily. since then it wont kick start but if i roll start it, it will fire right up. after it get warmed up it will start, but if i let it sit a while then i have to roll start it again. anyone have any suggestions?? help me

 

 

I had that same problem about 3 monthes ago...

 

But after i would bump start it a few times it wouldnt start at all after..

 

it was like it wasnt getting any gas through it...

 

 

so i checked the spark it was getting spark...

then i checked the air hose above the gas cap and it was kinked

it wasnt letting air come through to the tank...

 

check it out might help might not...

 

 

-Shane

Posted
i think i figured it out! i forgot to put the choke tube back on. i will get a new one tomorrow and see if that helps. im pretty sure this is why it will not idle and start up.

 

most likely your problem ^

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...