Jump to content

Recommended Posts

Posted

so... my banshee has been running like a raped ape.... my question is this... if im in the trails in low gears, when i jump on it after being on the bottom for a while, it will smoke blue a bit.... then completely clear up... is that meaning im loading up on the bottom? also, i changed my plugs, rode for likee an hour, tops, and my plugs were tan.... not even black or anything... they were a nice tan.... is that too lean? i wouldnt think?

Posted
so... my banshee has been running like a raped ape.... my question is this... if im in the trails in low gears, when i jump on it after being on the bottom for a while, it will smoke blue a bit.... then completely clear up... is that meaning im loading up on the bottom? also, i changed my plugs, rode for likee an hour, tops, and my plugs were tan.... not even black or anything... they were a nice tan.... is that too lean? i wouldnt think?

 

It's a new motor, and I'm sure you've checked compression. Tan is good, black is too rich...however, just by reading a plug after a long ride doesn't mean much....

 

Could be lean in one area, rich in another...etc.

 

What type of oil are you using, and at what premix ratio? Some smoke is fine...just means it's not burning off all the oil. Could also mean you're a tad rich in the lowers...could also mean you don't have as clean a burning two stroke oil...

Posted
supertechniplate all the way with me... its 32-1... other than that, the throttle is crisp as hell... pulls hard, fast, loud... oh my is it loud...

 

Try turning your air screws each out 1/2 turn...maybe lean the needle out one clip.

Super T doesn't generally smoke like others...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...