BANSHEEB0B Posted February 28, 2007 Report Posted February 28, 2007 I got 97 banshee ported 4mil stroker 5mill long rod new motor v force 3s new pj 34s. When its wide open it popes and falls on its face. i think the cdi box is bad because it wont start some times and i can plug my buddys cdi in and it fires right up is there any one that has any ideas THANKS Some times it starts fine with my box and some times it dont. the tors were gone when i bought the bike could the wireing going to that have something to do with it and what do you do with the wires that used to go to the tors thanks Quote
dajogejr Posted February 28, 2007 Report Posted February 28, 2007 I got 97 banshee ported 4mil stroker 5mill long rod new motor v force 3s new pj 34s. When its wide open it popes and falls on its face. i think the cdi box is bad because it wont start some times and i can plug my buddys cdi in and it fires right up is there any one that has any ideas THANKS Some times it starts fine with my box and some times it dont. the tors were gone when i bought the bike could the wireing going to that have something to do with it and what do you do with the wires that used to go to the tors thanks . Assuming you've checked all connections, I think you aswered your own question. If it were jetting, it would be all the time or not at all. Electrical issues usually rear their head once a bike is heated up....and are very inconsistent like you are mentioning... Also...check and replace the plug caps with some NGK caps to for peace of mind. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.