nicktoney Posted January 25, 2007 Report Posted January 25, 2007 its under the whole "anyone running XXpwks w stock airbox" thread.... i want some more pics of the brackets, blah blah what cut, blah blah... you know what i mean... i forget who had them... Quote
Mullet Man Posted January 26, 2007 Report Posted January 26, 2007 what it look like? link to the thread you saw it in? Quote
nicktoney Posted January 26, 2007 Author Report Posted January 26, 2007 my bad.... http://www.bansheehq.com/forums/index.php?showtopic=71929 this is the original thread... Quote
highroller355 Posted January 27, 2007 Report Posted January 27, 2007 (edited) depending on how your brackets are i had to make an L bracket and a Z bracket it sits a little lower ,the 2 1/4 inside diameter i think tubing pretty much runs straight across from the air box to the carbs it gets set back a little so the air box doesnt touch the exhaust mine just misses but once bolted in it doesnt move just used the 2 back brackets drilled 2 holes in the air box on each side used washes and lock nuts and tightened up very very easy to do 2 little brackets 1 piece of 2 1/4 hose 6-10in the most or 1 radiator car hose 2 1/4 and cut the 2 ends off that ,thats what i did 6 bolts , nuts and washers and 4 hose clamps, hope this helps if you have anymore questions ill pm you my cell give me a call tomorrow Edited January 27, 2007 by highroller355 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.