altitudeadjustments Posted November 10, 2006 Report Posted November 10, 2006 I was thinking about building some custom a-arms for my shee. I would like to know how the a-arms with heim joints bolt to the spindle. Do you have to drill the spindle out so a bolt bigger than the ball joint will fit or what, how do the arms and spindles attach to each other? Quote
ClimbAnyHill Posted November 10, 2006 Report Posted November 10, 2006 (edited) Edited November 10, 2006 by Climb Any Hill You Point At!! Quote
racer Posted November 14, 2006 Report Posted November 14, 2006 id suggest large heims with hi-mis spacers to allow for more travel than you will ever need, and the larger heims will wear better. Quote
Mullet Man Posted November 14, 2006 Report Posted November 14, 2006 id suggest large heims with hi-mis spacers to allow for more travel than you will ever need, and the larger heims will wear better. i agree, go as alrge as possible. use teflon lined heims and get a covers or jackets for them as well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.