STREETSWEEPAZ Posted October 12, 2006 Report Posted October 12, 2006 I found out that one of my sleeves in the Jug was badly damaged & it took some chunks out of the jug as well.......... The head / dome has damage as well but it could still work.... I would prefer to have all stock & in good shape but, I would consider some that need to be ported as long as the damage is not severe ........ Please LMK what you have... Thanks, BOB_T Quote
lbcbiker1 Posted October 12, 2006 Report Posted October 12, 2006 i have a stock head off an 05 maybe 3 hours 20+shipping Quote
ellison445 Posted October 12, 2006 Report Posted October 12, 2006 I have a ported set fresh bore, 20 over 150psi each jusg.. Quote
banshee332 Posted October 12, 2006 Report Posted October 12, 2006 I have I set of stock cylinders with a good head to go with them. no port work I think they are .60 over and need to be honed or bored. pm me if interested. Quote
STREETSWEEPAZ Posted October 12, 2006 Author Report Posted October 12, 2006 I have I set of stock cylinders with a good head to go with them. no port work I think they are .60 over and need to be honed or bored. pm me if interested. Banshee332 - .60 over ???? What are they capable of being punched out to ?? I will be honest - I dont know a whole lot about the banshee......... LMK if you can find the exact bore on them .... I just want to keep it on the safe side ellison445 - 150 psi each ??? I think my banshee was around 90psi when i got it ... Not alot of compression but, it fired up decent....... Quote
banshee332 Posted October 12, 2006 Report Posted October 12, 2006 (edited) Banshee332 - .60 over ???? What are they capable of being punched out to ?? I will be honest - I dont know a whole lot about the banshee......... LMK if you can find the exact bore on them .... I just want to keep it on the safe side ellison445 - 150 psi each ??? I think my banshee was around 90psi when i got it ... Not alot of compression but, it fired up decent....... im pretty sure that you can go .100 over so that would mean you would have some more bore's left Edited October 12, 2006 by banshee332 Quote
tree454 Posted October 12, 2006 Report Posted October 12, 2006 I have a set of cylinders that are stock port and have never been bored. I also have a stock head. I can get pics later today if interested. Tree Quote
badshee Posted October 12, 2006 Report Posted October 12, 2006 hey man got a very nice set if you want ill post pics if you want me to, let me know thanks Quote
tree454 Posted October 13, 2006 Report Posted October 13, 2006 (edited) I tried to post some pics, no luck though. They are standard 64mm, but they do need to be bored. Give me your e-mail address and I will send you some pics. [email protected] Tree Edited October 13, 2006 by tree454 Quote
STREETSWEEPAZ Posted October 14, 2006 Author Report Posted October 14, 2006 my email is - [email protected] Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.