3 Posted October 10, 2006 Report Posted October 10, 2006 Ok here is the situation guys. I put T6 pipe and rejeted 280 main jet at sea level with K&N filter. Everything was fine until yesterday mourning the f@#king TORS failed. But it just cut the fuel on the left cylinder. I manage to started it before i realize the TORS failed but just run on one cylinder and no idle. Than i start playing with the wiring on the trothle switch, i finally ended up unpluging the 3 wires TORS connectors and cutting the wire that go in the TORS body. Problem solve but no idle,so we play with the air screw and, probably a mistake, play with the screws on top of the TORS to manage to have a idle. Turned out we set a idle speed and i went riding it. Was not running perfect like before but run good. The problem is, it stall on me in 5th twice, like if i runned totaly out of fuel. And for some occasion it did<nt want to take it gas, like runnig full throtle and let it go and hit it again and dont want to take it. So do anybody have a clue of whats going on with that? could the sync of the carbs do that kinda things? or the damn TORS? And dont tell me to get a TORs elimination kit i look for it and could find any to be ship to Canada, so if you can help me with that too. Thanks for your time guys. Quote
3 Posted October 12, 2006 Author Report Posted October 12, 2006 Found the problem, disconnect all the electronic crap and resynch the carbs and everything run smooth now. anyways guys ahhahaha, i now that was pretty confusing to explain. Sorry for my bad english. How do you close a post??? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.