bertski077 Posted September 4, 2006 Report Posted September 4, 2006 I got a 99 banshee that i just got running. I put a new left carb on it and power washed it with the gas tank off and the plastic off. i go to start it up and no spark. PLEAAASE help i have no i dea i checkd all the connections the coil everything. thanks for the help Quote
dajogejr Posted September 4, 2006 Report Posted September 4, 2006 Remove the left side cover (and foot peg, and gear shifter, etc.) take some compressed air and blow the crap out of this area... I'd bet with a power washer you got water in by the flywheel and stator...and double check your electrical connectors.... You can get a wire drier at automototive stores, comes in a spray can. I'd coat the spark plug wires, and other wires with that stuff, too... You really have to be careful power washing around gaskets, seals and electrical parts... Quote
bertski077 Posted September 4, 2006 Author Report Posted September 4, 2006 i just took the stator cover off...it was dry...im goin to spray all the connections with wire drier. hopefully it works. any other ideas? it had great spark b4 i put the carb on. could it be the tors? Quote
dajogejr Posted September 4, 2006 Report Posted September 4, 2006 Yep...sure can, and most likely is. Sorry...I overlooked that. Unplug the black box under your tank, left side. Unplug both wire sets going into the tops of the carbs... See if that helps... Quote
bertski077 Posted September 4, 2006 Author Report Posted September 4, 2006 (edited) i did exactly wat u said...i have spark now another problem...i got it to idle, but the idle seems really high, i tried to adjust the air/fuel...is there an idle screw? also when i ride it and i hit the gas it isnt very snappy, it kinda hesitates? has low - low end power. could it be the jets? Edited September 4, 2006 by bertski077 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.