dajogejr Posted August 14, 2006 Report Posted August 14, 2006 I think you should run it without the lid (if you have the pro-flow adapter to seal it) and take a quick plug chop... If it's white or no coloring, up the main two sizes and do it again. Removing the lid if you truly are "on the edge" will probably result in 1 or 2 sizes bigger on the main... Just be careful and smart. a few bucks for jets is better than a few hundo for a fresh top end. Quote
hawk363 Posted August 15, 2006 Author Report Posted August 15, 2006 did a plug chop, looked good all dark on the inner part of the plug after i chopped it, tiny bit off wihte towards the bottom of the plug Quote
dajogejr Posted August 15, 2006 Report Posted August 15, 2006 Post up a pic....if you can. You can upload your photos to http://imageshack.us Paste a link into the forum.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.