Kama Posted July 8, 2006 Report Posted July 8, 2006 Does anyone know the thread size and type for the stock axle of a banshee? I seemed to have screwed up the outside two threads and now it wont take the castle nut and strips it out. Thanks in advance. Quote
Kama Posted July 8, 2006 Author Report Posted July 8, 2006 The threads to the outside where the hub is held on. Just thought I'd specify. Quote
sheecandy Posted July 8, 2006 Report Posted July 8, 2006 id just take one of the nuts to the hardware store and tell them to give you the matching thread chaser Quote
racer Posted July 9, 2006 Report Posted July 9, 2006 slip a wrench on the bare threads that will tell you whether its a 10 or 12 mil. and you can use a thread gauge or a precise ruler to find out your pitcyh. which will be either 1.25 or 1.5. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.