SvrdRam Posted June 9, 2006 Report Posted June 9, 2006 (edited) Hey guys i need some help.....went from a slightly moded 00" shee to a complete duner.....motors all new and i have no idea how and where to start with the jettin with all the new goodies....any help would be greatful.....all the info is in the sig.... Edited June 9, 2006 by SvrdRam Quote
SvrdRam Posted June 10, 2006 Author Report Posted June 10, 2006 come on......some ones gotta have a rough idea where to start!! any help would be greatful!! Quote
SvrdRam Posted June 21, 2006 Author Report Posted June 21, 2006 so no ones runnin anything close to this setup i take it?????? Quote
dajogejr Posted June 21, 2006 Report Posted June 21, 2006 I'd ask Rick Cairo...he could probably get you close... For my 4 mil cub (which...either has electrical problems or an air leak somewhere) it's been recommended to me 160 mains, 50 pilots, CEL needle in the middle clip and 2.0 turns out on the air screw.... It would help if you posted your elevation and temps you ride in... :wink: Quote
SvrdRam Posted June 22, 2006 Author Report Posted June 22, 2006 I'd ask Rick Cairo...he could probably get you close... For my 4 mil cub (which...either has electrical problems or an air leak somewhere) it's been recommended to me 160 mains, 50 pilots, CEL needle in the middle clip and 2.0 turns out on the air screw.... It would help if you posted your elevation and temps you ride in... :wink: thanks good point.....elevation is 800 to 1000 ft .....and temp runs in between 80-95 hope that helps :shrug: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.