bad boyz cycles Posted April 25, 2006 Report Posted April 25, 2006 I cleaned out both carbs after putting in the pingle valve and flushed the tank cean of all trash one side runs great the other side turns one if i put my hand over the intake of the carbs. if i unbuild the carb and ake off the pilot jet and put ti back to gether it runs like a champ for about 30 sec thens one side turns off and does nothing till i put my hand over the carb. andd that side keeps leaking gas out of the bowl. i have unbilt the seat and built back and it stops for a bit then starts doing it again. help me out i want to go ride this saturday. thanks Quote
blueshee03 Posted April 25, 2006 Report Posted April 25, 2006 sounds like one carb aint getting enough fuel.have you checked to make sure both lines are supplying fuel. Quote
bad boyz cycles Posted April 26, 2006 Author Report Posted April 26, 2006 i got it working now it was my seat i replaced the seat and the floats with another set of carbs that i had laying around and it stoped over flowing and i cranked right up. thanks for the advice Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.