97shee05 Posted April 5, 2006 Report Posted April 5, 2006 (edited) Im tearing down my banshee and am in a jam. See my swing arm pivot bolt wont budge. it will turn but wont budge. what do i do? also i started to punch it out with a punch and my punch broke in it. ( I know that was a stupid idea) Edited April 5, 2006 by 97shee05 Quote
txblueshee Posted April 5, 2006 Report Posted April 5, 2006 Is the quad still sitting on the ground? Mike Quote
txblueshee Posted April 5, 2006 Report Posted April 5, 2006 how? Iif the swingarm is in a bind that bolt won't come out... I use a long 3/8'' extension and a rubber mallot... Mike Quote
racer Posted April 5, 2006 Report Posted April 5, 2006 I cut mine out with an angle grinder spinning a 5" cutting wheel. took about 8 seconds and I got to buy a new bolt. You can pound it out, but cutting so much faster. Plus if you hit it like a man youre going to wreck the threads and have ot buy a new bolt anyway. Point of advice: when you go back together with it put a some antiseize on the bolt and the sleeve it rides in. Quote
97shee05 Posted April 6, 2006 Author Report Posted April 6, 2006 where do you cut at if you are going to cut it off Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.