transmission

[banshee_08]

well i had problems outta my transmission it was makin a whining sound like metal on metal and i finnaly got around to gettin some heavy weight gear oil and its still doin it im probly gonna take it to the yamaha dealer and ideas

[Wallrat]

FIrst and foremost this will prolly help you out on this board: Clicky

 

That said, the shee tranny is pretty hearty. I'd check out the clutch since that's pretty easy and tends to fail long before the tranny goes.

[WALLACE84]

Wait I notice that pic in your avatar..........are you the guy who owns everything2stroke.com?

[banshee421twin]

i got the same problem man my tranny is gone i was told it was the clutch but my bro looked at the plates and they were fine. I think it's the tranny

[banshee_08]

Wait I notice that pic in your avatar..........are you the guy who owns everything2stroke.com?

488085[/snapback]

 

no im not and thanx for the responces lol wal rat hooked on phonics ur funny

[banshee421twin]

Hey well when u bring that banshee to the yammy dealer tell me what it caust you to fix and what was wrong. TWIN

[2bzy2p]

if its whining sounds like bearings to me which wouldnt be the tranny,, i would start with the clutch side first.. not the actua clutches but mainly the basket and gears your basket could have tons of slop causing wear.look for any gashes on the basket and move it back and forth and towards u and away from u!

Edited March 17, 2006 by 2bzy2p

[banshee421twin]

Hey on my shee i do that and it sound's like there is a little ball inside dont sound good and i cant get the basket off.

[MILO]

i got the same problem man my tranny is gone i was told it was the clutch but my bro looked at the plates and they were fine. I think it's the tranny

488097[/snapback]

there's more to the clutch than just the plates. i'd rule out everything with the clutch before going to a stealership. clutch work is relatively easy, tranny problems means splitting the cases

Edited March 17, 2006 by MILO

[woodro77]

when you bring your banshee to the yamaha stealership for tranny work make sure you lube your ass up because they are going to fu*k you.

Edited March 17, 2006 by woodro77

[2bzy2p]

LOL hell ya they are .. everyone should try working on their own bikes its relativly simple just get a clymers or manual and try it yourself.. u get stummped ask questions it will probably save u minn a 100$

[racer]

oh come on. us stealership guys aint here to fuck you. we just chrage enough to make sure our families eat better than yours. HAHAHAHA j/k

 

 

post some pictures and i can more than likely walk you through the whole process.

[banshee421twin]

That's funny haha. TWIN

[banshee_08]

Does it make the whining noise only when the clutch is let out and stops when you pull the clutch in? Mine did the same thing. I adjusted the thing ont he pressure plate and perch the whole way in. Make sure you soak your clutch or it will whine like if its dry.

488481[/snapback]

 

yes its only does it when the clutch is out and what do you mean soak it?

[banshee421twin]

I will have my brother look at it. He can do all the work evan with the tranny but he wouldnt have time for that shit. But if it aint the tranny he will fix it for me no charge.

 

TWIN