fmfbanshee98 Posted December 23, 2005 Report Posted December 23, 2005 Ok I just bought a new clutch kit and installed it. Followed all instructions and put it back together the way it was and got the arrows lined up. When i put it in gear with the clutch lever pulled it wants to jump and go. Anyone know what the problem is? I have a new clutch basket also. Quote
fastbanshee8 Posted December 23, 2005 Report Posted December 23, 2005 Did you adjust the cable, so that you have free play at the lever? If not, that should solve your problem. Quote
fmfbanshee98 Posted December 23, 2005 Author Report Posted December 23, 2005 I adjusted it so there is no play at the lever. So adjust it so there is a little play at the lever?Thanx for the input. Quote
fastbanshee8 Posted December 23, 2005 Report Posted December 23, 2005 I adjust mine, so that I can slip a nickel between the lever and the perch. You need a little bit of slack in the cable, or your clutch will never fully engage. Quote
fmfbanshee98 Posted December 23, 2005 Author Report Posted December 23, 2005 alright thanx when i rev it up it kinda wants to move is that normal?? Quote
fastbanshee8 Posted December 23, 2005 Report Posted December 23, 2005 Mine will do it once in a while, but if I put a jack stand under it, so that the rear wheels are off the ground, it's running, in gear with the clutch pulled in, the rear wheels will spin, although slowly. Did you soak your clutch plates in oil, before installing them? You will also have to break in the clutch, before it performs 100%, like it should. It's kinda like putting new brake pads on, everything needs to "wear in", to work right. Quote
fmfbanshee98 Posted December 24, 2005 Author Report Posted December 24, 2005 cool man thanx for the info. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.