sst & porting

[sheecandy]

i was contemplating using my sst pipes with my newly dune ported cylinders from racers edge tryed the shee out this weekend at glamis runs great got some kick ass low and mid range pull signs off a little early compared to my 00 old dune port and pro circuits happy with my new set up :dance

list of mods

dune port stock bore

sst pipes

stock carbs clamp on k&ns 350 mains

v-force reed valves

+4 degree key

racers edge cool head 20cc domes

skat trak haulers

[Justintoxicated]

I thoguth you were supposed to bore and hone your cylinders after porting ?

[FASTOYS]

SSTs work great with dune/play port! If ya need more top end without sacrifising much bottom end try some 35pwk Air Strykers!! Give me a holler when your ready for them....

[Justintoxicated]

SSTs work great with dune/play port!  If ya need more top end without sacrifising much bottom end try some 35pwk Air Strykers!!  Give me a holler when your ready for them....

433135[/snapback]

 

wouldent 33mm PWK's work better with a non stroked motor?

[FASTOYS]

Not in our case. Both are very good way to go.

[kotin6]

i have pretty much the same set up and Im in the SSTS work great, you do however need bigger carbs, Im in the market for a 33mm set up my self so fast hit me up.