dashee03 Posted November 1, 2005 Report Posted November 1, 2005 im at sea level with t-5,kandn airfilter,and Vforce 3 reeds valves what main jet size? Quote
2003LimitedBanshee Posted November 2, 2005 Report Posted November 2, 2005 When you say K&N, are you running a K&N and a Proflow setup? With a lid and snorkel, no snorkel, no lid, or K&N clamp ons? All of this will affect what jetting will be appropriate for your bike. Also what is your air temp? That info should help us get you darn close. Quote
dashee03 Posted November 2, 2005 Author Report Posted November 2, 2005 its about 65degrees and my airbox has no snorkel but i do have a lid. I also have 12 holes drilled in my box with foam air vents in them Quote
sheefreak Posted November 2, 2005 Report Posted November 2, 2005 I would say to be safe, start w/320's, 27.5 to 30 pilot, lower the clip one notch to richen up the mid-ckt. Quote
2003LimitedBanshee Posted November 3, 2005 Report Posted November 3, 2005 Agreed 310-320 should be about right. Although I would say no bigger than 27.5 on the pilot in my opinion, but every bike runs a bit different. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.