biggest front sprocket

[Ryda85]

hey guys i am looking to pick up a tm chain slider....whats the biggest front sprocket you can run with one. i thought it was a 15t but i thought i heard someone running a 16t with one.

 

hey while we are on sprockets....what gear ratio should i run with my passion stroker? i was thinking 16-40 but if the slider wont fit, maybe a 15-38??

i ride mostly woods with some quick drags when it gets open.

[2003LimitedBanshee]

If your talking about the swingarm slider (the one you have to take the swingarm off to replace with a stock unit), TM's website says it will accomodate 13-17 tooth front sprockets so you should be good with a 16. Are you riding flatter, more open woods. Those sound like tall gears you're pulling, but I ride on the west coast with tight, steep wooded areas, and shorter gearing is preferable.

 

Sorry forgot to add link:

 

http://www.tmdesignworks.com/xcart/custome...&cat=274&page=1

Edited October 11, 2005 by 2003LimitedBanshee

[Ryda85]

my fault....what i ment was a case saver. i have no clue where chain slider came from.

[mike23]

I run a 17 tooth with my case saver, no problem

[2003LimitedBanshee]

TM only claims their case savers will fit 12-15 tooth setups. I run a 13 no problem (obviously), and it sounds like you should be able to run bigger (mike23), so...

 

http://www.tmdesignworks.com/xcart/custome...&cat=255&page=1

[mike23]

sorry Ryda my casesaver isn't TM, looked at the wrong bike.

[Ryda85]

what kind is it? maybe ill just get one of those instead

[mike23]

http://alba.buyol.com/Item/28-413xx.htm

 

My bikes in storage but I'm pretty sure it's this one. I called and they said it would accept any size sprocket.

Edited October 14, 2005 by mike23

[Justintoxicated]

http://alba.buyol.com/Item/28-413xx.htm

 

My bikes in storage but I'm pretty sure it's this one.

Edited October 14, 2005 by Justintoxicated