Factory-fit Subwoofer Enclosure andSubwoofer

[Banshee rage]

This Box and Subwoofer combo fits 2000 thru 2003 FORD F150 trucks with a Supercab.

 

BOX:

 

Q-Logic holds one 10" Type 1 subwoofer and fits under the rear seat on the driver's or passenger's side, without sacrificing any space. It looks like original equipment, but gives you deep, pounding bass no factory sound system can touch. Internal volume 0.65 cubic feet. The color of this box is light grey

 

Subwoofer:

 

The Punch Stage 2 P210S4 10" sub uses a 2" voice coil and a beefy 60 oz. magnet for solid power handling. The voice coil is wound on an aluminum former to shed heat quickly and keep your sound free of distortion. Put this pounder in a sealed or ported enclosure

 

molded polypropylene woofer cone

60-ounce magnet

frequency response 20-200 Hz

power range 50-200 watts RMS

peak power handling 400 watts

sensitivity 85.8 dB

4-ohm impedance

top-mount depth 5-3/8" (without removable magnet cover. With cover, depth is 5-5/8")

sealed box volume 0.65 cubic feet

This is a USED system about 4 months old. I bought a 2005 truck and it will not fit. But its in mint condition and pounds like all hell is breaking loose. The box alone was $229.00 and speaker was $109.00.

 

ASKING $250.00 shipped to you.

[01orangeshee]

wanna send me just the sub??

[Banshee rage]

No thank you want to sell in one piece.

[FATBANSHEE]

what are the dimensions on the box? wonder if it will fit under the back seat in my GMC dinali. the color is a dead match.

let me know.

thanks,

Chris

[Banshee rage]

Specifications:

 

Internal Volume: 0.65 Cu/Ft

Cutout Diameter: 9.184"

Mounting Depth: 5.5625"

Maximum Frame Width: 11.1875"

Enclosure:

 

Materials: The front of the enclosure is finished with dark graphite molded ABS plastic with a wrinkled surface pattern. The main body of the enclosure is made of 3/4" particle board covered with medium gray box carpet. On the bottom of the enclosure there is an integrated, molded black ABS plastic base that fits the contour of the floor in the vehicle.

Design: Sealed enclosure. When the woofer is installed it is down firing.

Connections: One set of spring posts. They will accept bare wire, pin connectors, banana plugs and dual banana plugs. They will not accept spade connectors.

Note: Dimensions are at widest points; keep in mind that these enclosures are custom made to fit in a particular vehicle, so the enclosure is molded to fit in that specific location.