ikikazz Posted July 9, 2005 Report Posted July 9, 2005 how much "push" should the pushrod have against the clutch. and also should the ball on the end just fall off and the push rod just slide out (i presume) mine is like damn near welded in there i cant get it out to save my life... well any help is much appreaciated... Mike Quote
wesw Posted July 9, 2005 Report Posted July 9, 2005 mike the ball should come out fairly easy. as for the rod some have had problems getting them out. try a strong magnet on a wand. if you cant get it out still you can pull the clutch actuator arm by the stator, out and push the rod towards the stator adn see if the end is mushroomed. i fyou you wiill most likely have to split the case to use a punch to push the rod out. while you have the clutch assembly apart you should get this parts http://www.wickedatv.com/duportal30/home/t...hannel=Products its called banshee clutch pusher. its a pancake bearing that wont allow the rod and ball to weld ps your still a pussy lol Quote
bansheefreestyler Posted July 10, 2005 Report Posted July 10, 2005 i had a problem with mine. the end fucked up and my clutch wouldnt work. couldnt get it out to save my life. i just got one of those things the cable hooks up to and put that in and it works fine now but that rod is still screwed. seems to work good now though Quote
wesw Posted July 11, 2005 Report Posted July 11, 2005 if your rod is screwed you need to replace it. have some split the case adn remove it. dont half ass something or you will really mess shit up Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.