Polish Posted June 24, 2005 Report Posted June 24, 2005 I have a 400 stroker 28mm pwk 160 main jet 4th clip Sea Level 1/4 to 1/2 throttle is perfect!....so I assume low end jet is fine when I hit top end it dies.....almost like it is flooding out! Up or down on the Main? Any body have this set-up? I bought the carbs direct from Sudco.......and told the tech what motor mods..and this is what they sent me........and top end runs like CRAP! Any carb Mechanics out there? Quote
wesw Posted June 24, 2005 Report Posted June 24, 2005 try a 150 main and see how it acts. i run a 140 main at 900ft elevation with 34 but your in compton,"city of compton" lol so probably around sea level so try a 150 and do a plug chop. Quote
Polish Posted June 24, 2005 Author Report Posted June 24, 2005 Thanks for the help............I have 55 pilots......will that change to? Quote
wesw Posted June 24, 2005 Report Posted June 24, 2005 Thanks for the help............I have 55 pilots......will that change to? 385168[/snapback] shouldnt on the top end i run 55 on my 34s Quote
rocketboy Posted June 29, 2005 Report Posted June 29, 2005 (edited) i have these... try a 150 main and 52 pilot IMHO (dont go up in mains) also do a plug chop!!!!! Edited June 29, 2005 by rocketboy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.