Jump to content

Recommended Posts

Posted

A friends Banshee was running fine one weekend and all of a sudden it's running funny and the right side isn't firing, or barely at all. Changed spark plug, switched plug caps around, cleaned carbs, fuel lines to both carbs are brand new. Did a compression test and came up w/190 both sides. The shitter is my buddy was running 93 octane for last 2 months he has owned machine. Claims he did a compression test when first aquiring machine and only came up w/135 per side. Does have a cool head, not sure what size domes. Any suggestions? Also he is getting oil seeping out of the pipe, but not spraying out. When i had a bad crankseal, oil would just spray out the pipe, but would still fire fine. He has aftermarket 34mil kheins, tors has been eliminated. Any suggestions would be appreciated. Is it possible there is a problem in the right side and still get a good compression reading? :confused:

Posted

pull the head off and see what's what in there. if everything is cool, then look at the stator and then the cdi and secondary coil. i would do it in that order.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...