natemxz600 Posted May 18, 2005 Report Posted May 18, 2005 just picked up a dynoport pipe.just wondering what if it will still pull 6th gear with 14/41 gearing with 20" tires,stock porting,and a k&n pro flow. Quote
scottt89 Posted May 18, 2005 Report Posted May 18, 2005 I had a Dyno Port on my Stock banshee until today, when I put on a Pro Flow filter and a set of reeds and spacers. It didn't have the Top end that your Toomys, Pro Circuts, Etc... will have, but it gives a good bit of low end. W/ a set of ITP XC 20" tires, Carbon Tech reeds, and a filter, that bike rips. Quote
natemxz600 Posted May 18, 2005 Author Report Posted May 18, 2005 i had t5s before i installed the single and i was just pondering if i would still be able to pull 6th on those long dirt roads.Sounds like a shouldnt have a problem though Quote
racer714 Posted May 18, 2005 Report Posted May 18, 2005 i had t5s before i installed the single and i was just pondering if i would still be able to pull 6th on those long dirt roads.Sounds like a shouldnt have a problem though 370738[/snapback] I have identical specs on my shee and it pulls decent, but it really shines in 1st thru 4th Quote
Ducman Posted May 18, 2005 Report Posted May 18, 2005 On a hard surface like a dirt road, yes. On soft terrain like sand, probably not. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.