j70gmc Posted February 21, 2005 Report Posted February 21, 2005 in the process of putting banshee barrells on to a ypvs 350(rz 350)bottom end,cant see any difference at all from the outside,does anyone know of any problems Quote
racer Posted February 21, 2005 Report Posted February 21, 2005 most people go about it the other way. putting rz jugs on a banshee bottom end. in this case i can see no issue you may have with size. but you will have some electrical issues to work out, or remove. Quote
Holyman Posted February 21, 2005 Report Posted February 21, 2005 Should be a no brainer. You don't need the RZ electronics, more space for your pipes, a little more room around the top end. You will have a smaller water jacket and you'll need to run the Banshee head too, but should be an easy swap. Quote
theeechozen1 Posted February 21, 2005 Report Posted February 21, 2005 same as putting shee jugs on a shee bottom end, did one last summer no probs at all, shifts nice! Quote
bogart Posted February 21, 2005 Report Posted February 21, 2005 in the process of putting banshee barrells on to a ypvs 350(rz 350)bottom end,cant see any difference at all from the outside,does anyone know of any problems 327127[/snapback] whats the point Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.