v force 2 reeds

[champ6966]

i recently installed the vforce 2 reeds and im wondering what position the needle clip should be in and could that cause a bog at wot if wrong? or is the mains the only thing that can cause that?

thanks

[Wallrat]

pilot/airscrew - 0-1/4 throttle

 

Needle - 1/4-3/4 throttle

 

mains - 3/4-WOT

 

 

If your problem is WOT then it ain't the needle. Generally I try to get the jetting good at WOT and at idle while keeping the needle clip in the middle. Once I've got the airscrew and main right, I'll try moving the clip one postition and trying it out to see if it rides better. If it rides worse I'll try it one postion in the other direction. If it rides better then I'll try moving it one more clip to see if I can find the sweet spot.

[champ6966]

i recently installed the vforce 2 reeds and im wondering what position the needle clip should be in and could that cause a bog at wot if wrong? or is the mains the only thing that can cause that?

                                                    thanks

321274[/snapback]

 

 

thanks ill try leaning the mains