lastlegwarrior Posted February 9, 2005 Report Posted February 9, 2005 (edited) I got a quick question about my preparation for st. joe state park on the 2nd,3rd,4th, and 5th of march (just in case anyone is gonna be in the area). I just rebuilt the shee with a new set of .030 over wiseco's and and new seals. I went riding the other day (like second time since the rebuild) and i noticed my lower end seemed to be making a little noise. Since i just spent the money to rebuild the upper half i wouldn't want the lower half to grenade and take out that new bore and pistons. Also i didn't want to drive all the way to St. Joseph and have my crank go out and ruin my riding time with my buddies. So i have decided to purchase a new hot rod crank and hopefully safegaurd myself against this problem from occurring. What i was wondering when i go to splitting the cases and resealing them am i going to have to worry about replacing the seals, they can't have more than 2 hrs. on them. So am i going to have to replace the seals along with the crank, i just really hate to because they aren't even barely used, i mean 2hrs. is minimal. Any help with this issue would be greatly appreciated. thanks. Edited February 9, 2005 by lastlegwarrior Quote
lastlegwarrior Posted February 9, 2005 Author Report Posted February 9, 2005 Also i hear st. joseph is rather sandy, i've never been personally, but my buddies say it's got some good sand. i was wondering about running k&n clamp ons with outerwears would i be ok, or not? Quote
enFORCER Posted February 9, 2005 Report Posted February 9, 2005 Are you talking about ( St. Joe state park )???????????????? Quote
lastlegwarrior Posted February 9, 2005 Author Report Posted February 9, 2005 yeah, you guessed it. Quote
enFORCER Posted February 9, 2005 Report Posted February 9, 2005 I ride/race at St. Joe's quiet a bit.... There is lots of sand and lots of woods... Very hilly woods trails... And theres a few people dowm there that like to drag race, if your into that.... Quote
enFORCER Posted February 9, 2005 Report Posted February 9, 2005 As for the K&N filter..... That's what I run on my bikes..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.