need some info on maintance

[redcell43]

hi all this has probally been ask for a hundred times. i need to know what genral maintance needs to be done after each rideing trip. i know to check all bolt and nuts and fluide levels. but dose someone have a list they can email me or post im about to spend a bunch of money getting my banshee fixed up and wanted to keep it in good running condition. thank you

[sredish]

During the race season, I check my lug nuts, hub nuts, air pressure, case oil, coolant, air filter, grease the fittings, lube my chain and check for proper adjustment BEFORE I ride.

 

Then, AFTER I ride, I'll take a good look for any leaks and then I'll give the whole machine a good wash with the seat off. I have a sealed airbox lid for washing, and I keep it on until I ride or need to start the motor up.

 

Back at the shop, I'll check for wheel bearing play, axle play, hub nuts, and case oil. I'll also give the whole machine a good hard look over and poke around looking for loose things and compress the suspension some listening for weird noises. I'll relube the chain, just a little to keep from building rust after the wash.

 

Once that's all done, I'll cover her up with my magic beauty blanket, hoping all the billet will be polished when I uncover her again...

 

I should probably do more after the ride but I really don't. And I don't spend a whole lot of time doing the above. I do just enough. She doesn't complain either, only when we're done riding... she wants to keep going.