wickedfmx Posted October 1, 2004 Report Share Posted October 1, 2004 well me and a friend rebuilt his banshee this past winter and he had to split the cases to put in a new hot rod crank....well when we put it all back together we were seeing if it kicked over and it would go about maybe half way then stop and stick...and now the side case wont got one......anyone have any sujestions(spelling) Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted October 1, 2004 Report Share Posted October 1, 2004 Sounds like you don't have the kickstarter gear installed properly. You'll have to take the shifter off & pull that sidecase off there somehow...give it some patience & drink a beer or more...it will come off. Get a clymers & it will show you how that gear should be installed. Quote Link to comment Share on other sites More sharing options...
svtkid78 Posted October 1, 2004 Report Share Posted October 1, 2004 I don't think you preloaded the return spring. Like mentioned above. get a clymers and do it again. Quote Link to comment Share on other sites More sharing options...
wickedfmx Posted October 1, 2004 Author Report Share Posted October 1, 2004 he has a clymers and he has done what it says and it still wont do it he things it has to do with the gears not meching right in the transmition Quote Link to comment Share on other sites More sharing options...
svtkid78 Posted October 1, 2004 Report Share Posted October 1, 2004 Well it sounds like you know the problem then. Tear her apart again. Quote Link to comment Share on other sites More sharing options...
wickedfmx Posted October 1, 2004 Author Report Share Posted October 1, 2004 hehe well i would but i dont know forsure if that is and i dont wanna screw it up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.