Noob Banshee Posted October 1, 2004 Report Posted October 1, 2004 Ok i just got back my frame and bearing carrier from the PCer an the edges on the frame and carrier are like almost bare like you can see the metal is that normal? Or is it really hard to get the edges? or should i not see anything egdes or other wise? Quote
BriggsRi Posted October 1, 2004 Report Posted October 1, 2004 (edited) Noob, Was the frame sent out solo - no parts attached? If solo they should have been able to fully coat the frame. When painting with powder or " Wet Paint " edges, mainly corners, are very difficult to fully cover, it can be done, but a little skill is required. Now if the frame was built-up, I can see where they would have some issues, but, they should not have sent you your frame back with bare metal showing - not cool. Edited October 1, 2004 by BriggsRi Quote
ondeeeznuts Posted October 1, 2004 Report Posted October 1, 2004 Should be like this man, no metal showing Quote
BdBanshee Posted October 1, 2004 Report Posted October 1, 2004 I agree, no metal should be showing. I have had several frames powdercoated and none has ever looked like that. After a few years of riding boots rubbing on it, it will start wearing through though! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.