Jump to content

Recommended Posts

Posted

I have a problem, my banshee leaks oil and antifreeze from the same place underneath the bike. I know it is not the clutch cover gasket or the bolt to drain the oil. I am wondering how antifreeze is mixing with the oil and if this can cause damage? If anyone could help me it would greatly be appreciated. :cheers:

Posted

Ok, The oil and antifreeze together is not good. you

need to have the problem fixed asap. As far as how it

got mixed together check the oil seal behind the water

pump, it could be bad, its located in the clutch cover. as far as

the leak check and make sure the clutch cover is tight.

Hopefully you dont have a crack in your case. good luck. :headbang:

Posted

Well if there is a crack in the case You may have to

replace it. Ive also heard of some people being able

to weld the cases. But im not to sure about that. Where

on the case do you think it has a crack? :ph34r:

Posted

Try checking the O-ring on the coolant pipe that goes into the clutch cover side of the case, I've had that do the same thing you are describing.

Posted
Try checking the O-ring on the coolant pipe that goes into the clutch cover side of the case, I've had that do the same thing you are describing.

yep, me too. and if yours is torn just order a new one from the stealership cause i could not find one the right diameter and thickness of rubber to use.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...