350winder Posted June 25, 2004 Report Share Posted June 25, 2004 (edited) Hi there, i've read many times de theory 101 of jetting and i understand it. I've just got the pipe and tried couple setup. Here's my prob i have a bog spot at 1/4 to 1/2. It idles good, it's goes right off the idle to 1/8 -1/4 and after that a bogging spot (but very short) and it rip to full throttle. Stock motor stock cabs 25 pilots 290 mains snorkel removed Durablue air filter Boyesen dual stage reeds 1.5 turns out sea level 70F Need some advise!!! Edited June 25, 2004 by 350winder Quote Link to comment Share on other sites More sharing options...
randelator Posted June 25, 2004 Report Share Posted June 25, 2004 ok go with the clip on the 4 groov from the top of the needle should solv the probleme!! Quote Link to comment Share on other sites More sharing options...
350winder Posted June 25, 2004 Author Report Share Posted June 25, 2004 (edited) I was on the 4th, came back to 3rd and it was better. Is it possible that i have to go to 2nd. Don't know, for now i'm lost. Is possible that at this point of bogging, i'm getting on the main and at this point it's too rich. Edited June 25, 2004 by 350winder Quote Link to comment Share on other sites More sharing options...
sredish Posted June 25, 2004 Report Share Posted June 25, 2004 Only way to know if the second is better is by trying it. That's what I'd do. Just be sure your mains are dialed in properly before you go leaning your needle much. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.