Put A Brake Block Off On..electronic Problems Now.

[STLbanshee]

Just put that parking brake block off plate on my 2002 and I got that stupid wire that went into the praking brake..and you know if you like dont have it pressed in, it wont let it rev, like its a rev limiter, but as soon as you press the button, it will rev up..so how do you go about fixing it?

[Stuff]

I just unhooked the e-brake wire from the harness...if I recall right Just trace it back to where it hooks into the main harness and there is a connector....unplug it

 

That was it and it runs fine.

[JTQuad]

I too just unplugged mine- JT

[boonman]

I am not sure about unplugging certain things. What I did on my bike, I got the TORS eliminator kit at the same time as my parking brake block off. I just unplugged the brain module which is located under the fuel tank adjacent from the coil. (the left side)

[banshee0044]

unplugg it and put tape over the ends of the wires...thats what i did?

[ledofthezep]

I just unplugged the brain module which is located under the fuel tank adjacent from the coil. (the left side)

 

Right....on the left side of the tank, may be just below the tank there's a connector, un-hook it & tape it. You shouldn't have to cut/splice any wires. If you trace the wires coming out of the stock clutch perch you'll find the connector. Just disconnect it.