gbf4ever Posted April 11, 2004 Report Posted April 11, 2004 Im replacing my bearings and im having a hard time getting the clips out that hold the bearing in. Any tips you guys have would be appreciated. Thanks in advance. Sean Quote
dnhyoung Posted April 12, 2004 Report Posted April 12, 2004 I sacrificed a small straight blade screw driver, and bent it 90 degrees at the end to allow better prying, or if you have any small dental tools like they sell at the flea markets. They work great..... Quote
94BansheeRider Posted April 12, 2004 Report Posted April 12, 2004 If you are talking about the C-clips that have no place to grab them, I used a very small drill bit and drilled a small hole just underneath so I could get a dental tool under it to pry it out. Quote
MILO Posted April 13, 2004 Report Posted April 13, 2004 a small screwdriver, a light hammer, and a lot of patience! Quote
gbf4ever Posted April 18, 2004 Author Report Posted April 18, 2004 i still cant seem to get it .....i got one but the other wont move can anyone give me details on how they did it Quote
Meat Posted April 18, 2004 Report Posted April 18, 2004 (edited) PIVOT WORKS SHOCK BEARING REPLACMENT ON THE BANSHEE ZONE Edited April 18, 2004 by Meat Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.