SICK BOY Posted March 2, 2004 Report Posted March 2, 2004 I just started my banshee for the 2nd time since the rebuild.I let it warm up to 100 degree's and the rode it slowly down the driveway and back.(had it runnig for about 20 mins)I then noticed that theres a little coolant leaking from the jugs(or at least one of them).It is leaking in the front between the cases and the cylinders.My ? is can I tourqe these back down,or do I have to change that gasket?? THANKS GUYS Quote
Blacksmith Posted March 2, 2004 Report Posted March 2, 2004 Did you put the rubber plugs back into the bottom of the water jackets on the cylinders before you put them back onto the cases? If you did, the only way you could have a water leak at that point is if the plugs are not sealed or if you have a crack in the cylinder. The base gaskets are not designed to stop water, only air. I would pull the cylinders and check the plugs. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.