die_infidel Posted March 1, 2004 Report Posted March 1, 2004 I know alot of people ask this same question, but i can't find one with the same mods so i ask this anyway. I was wondering what you guys could guess for hp of my shee looking at the mods in my signature. I'm in the process of doing all these mods to the stock shee along with trued & welded crank and Barnett dirt digger clutch kit. Any suggestions or ideas of what i can do would be helpful or what you think of this setup. Would a 4mm stroker crank work even better or is the power gain unoticeable with my setup. Thanks Quote
brugal Posted March 1, 2004 Report Posted March 1, 2004 Yes a 4mm stroker will make a difference.. Quote
die_infidel Posted March 1, 2004 Author Report Posted March 1, 2004 Whats does the 4mm stroker do give more low end torque? Quote
Brian G Posted March 2, 2004 Report Posted March 2, 2004 My mods are close to yours and I hit 72 hp Aggressive trail port .020 over pro circuit pipes vforce +5 degrees on the timing k&n clamp ons Lame ass boost bottle 15/41 gearing Trinity stage 4 cool head with 19cc domes +6 chrome swingarm Stock carbs 340 mains, 35 pilots, stock clip on the needle We did test with cpi pipes and 34 mm carbs and I did hit 78 hp but I cant use CPI's because they do not have spark arrestors!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.