87 Roller For Sale/trade

[Holyman]

I have an 87 banshee with a blown motor the engine was blown when I bought it. The engine is blown to bits and is probably only good for the tranny. One rod came out the top and took out the right jug and case and the rest of the crank took out the bottom. The J arms are bent but the lower A arms are OK. It comes with everything except... The electronics, the front hubs/brakes/spindles, rear disc, tires and rims. The plastic is cracked and the seat is ripped. The pics attached {I hope} show it the way I bought it. It does not have the grab bar, the nerfs, or the pipes. I can't remember all the stuff that's on or off of it right now. If you want more or less of it, then EMAIL ME!!! I HATE PM'S!!! [email protected]

[Holyman]

Here's the rear view... I want $850 with the engine and $700 without. I will ship but I'll have to charge for crating and you need to figure a minimum of $300 to ship. I am willing to do a full or partial trade up or down. I am looking for...

a round house carrier with tapered bearings, stainless pipes {Trinity} or an enduro type on/off road bike that can be licensed for the street. Preferrably Yamaha. I live near the Wisconsin/ Illinois border close to Lake Michigan. Any questions... EMAIL ME, DO NOT PM ME!!! [email protected]

[Holyman]

I keep getting emails from people but no return addresses. PLEASE EMAIL ME DIRECT AT... [email protected] or post your email address here!

[SHEEDAISY]

if you are keeping the wheeles tires spindals and hubs it wouldnt be a roller would it ?

[Guest Yamaha Banshee Rider]

Hey, Um would you sell the motor only. Or how about a trade. I have a Yamaha Banshee rolling chassis without a motor and it is worth $1200 right now. I invested a lot of money into mine ever since i bought it and i was wondering if you would trade yours for mine. I will trade my dirt bike with it if you want more. and my dirt bike has a motor. So think a bout it. I reall want to get a shee with a motor running or not as long as it has a motor, E-mail me at [email protected]

[MRMOONEY]

YOU HAVE EMAIL!!!!!!!!!!!

[Holyman]

OK I've gotten a few more emails. If anyone is interested in just parts of it, let me know... [email protected]

Just so we're clear on this, the engine has a hole in the bottom and the rod is stuck thru the top of the case and embedded in the intake of the right jug. I do have an upper and lower case I got off of ebay before I realized this one was so far gone. The other case has been epoxy'd but I can't remember if it's top, bottom or both.