firehawk Posted January 18, 2004 Report Posted January 18, 2004 havent been on the forum in a while and i've just recently ran into a problem with my bike...My parking brake block off is shorting out somewhere, causing me to lose all power when giving it gas. If i wiggle around the connector near the clutch lever is temporarily fixes it. Is there anyway to jerry rig this thing to disable the block off altogether? Or am i bettter buying a new lever and ditching all that bulky blockoff junk? Quote
Blacksmith Posted January 18, 2004 Report Posted January 18, 2004 Trace the wires from that switch down to the plug in to the harness. If you unplug the switch at that plug in you should be good to go. Quote
evil Posted January 18, 2004 Report Posted January 18, 2004 ditch that hunk of crap, and the wiring too. unless you want the whole set up, i might have one in the garage. but imo, ditch it ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.