No Spark After Engine Rebuild

[Metalifann]

I just got my motor back together and in the banshee and I cant get spark. I've disconnected the TORS control unit and made sure the key switch is on and run switch is on. I can't figure this thing out. The motor siezed and I had to rebuild it with a new crank and all, but I cant see that damaging anything. Any ideas??????

 

Thanks,

Chris

[Dragg-on]

make sure the pickup coil is close enough to the flywheel.

[Metalifann]

I've adjusted it so that its almost touching and still nothing. Any other ideas?? It was a part for a long time in my garage, but I dont see how that could effect anything.

[Metalifann]

I took the coil off and its nasty inside the plug ends. I couldn't even get a secondary coil reading at all. I'm gonna try my buddy's coil and see if that fixes it.