coleman66six Posted July 30, 2020 Report Posted July 30, 2020 At first when i pressure tested the engine it leaked at the bottom on the same piece, and i noticed that i was missing a gasket between there, so i put one in on each reed and then tested it, got rid of the leak on the bottom but now there is one on the top of each. How do I feel this and should I worry about it? Thanks. Quote
Canadianshee Posted July 30, 2020 Report Posted July 30, 2020 Small amount of yamabond should fix you up, have had luck with added second gasket on both side of cages. Less to clean off later Sent from my LG-H873 using Tapatalk Quote
coleman66six Posted July 31, 2020 Author Report Posted July 31, 2020 Small amount of yamabond should fix you up, have had luck with added second gasket on both side of cages. Less to clean off later Sent from my LG-H873 using TapatalkWorked good and holds 7 psi for 7 minutes, thank you. Sent from my iPhone using Tapatalk 1 Quote
Canadianshee Posted July 31, 2020 Report Posted July 31, 2020 Worked good and holds 7 psi for 7 minutes, thank you. Sent from my iPhone using TapatalkGood stuff. Sent from my LG-H873 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.