dmoore24 Posted April 10, 2018 Report Posted April 10, 2018 Hey guys just picked this banshee up and tearing it down to replace the crank seal. Was wondering if you guys had any idea why the lower case has a bevel around the seal? My other set of cases doesnt have it. Tried to search old threads but didnt find anything. Thanks. Sent from my VS987 using Tapatalk Quote
JUSTWANNARACE Posted April 10, 2018 Report Posted April 10, 2018 First off that seal is in backward. I've had some cases chamfered like that and some not. But when they are it is both cases. Check the #s on the back of the case(by the breather) and make sure the cases are a matched set Quote
dmoore24 Posted April 10, 2018 Author Report Posted April 10, 2018 First off that seal is in backward. I've had some cases chamfered like that and some not. But when they are it is both cases. Check the #s on the back of the case(by the breather) and make sure the cases are a matched setI thought it looked odd. Been awhile since I've worked on one. Thanks though ill check that. Sent from my VS987 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.