Cheap mtb/bike speedo install

[maggdog]

Tools you need:

I used gopro adhesive (it can hold a camera will hold this little piece) and I cut the adhesive to form of base mount:

 

Also. You can drill 4 holes to the plastic and use 2 ziptight

 

Mount the sensor:

 

For the magnet. you need to take of the wheel and drill a little the wheel for seat the magnet and will epoxy works better

with this. You will got the idea

 

Check sensor for making contact with the magnet:

Now you can mount the dash/speedo at the base

Making contact:

Check on dash:

It doesn't has contact you can bent the place a bit:

Check again:

 

Done!

 

This is a basic dash only has:

Clock, current speed, odometer, trip distance(resetable). Doesn't has light for the night but still working

 

You can adjust the circumference:

 

 

I take my smartphone with a speedo app and i run

With this table I used some of those numbers until match or are close with a gps speedo

Not will be exactly the same but will similar thats the idea

 

 

Sent from my VTR-L09 using Tapatalk