EaCastillo00 Posted June 24, 2017 Report Share Posted June 24, 2017 Hello guys, i did my carbs yesterday, My bike has recent Top End, stock bore 64mm wiseco, K&N proflow kit, T5 pipes and silencers. My jetting is 280main, 27.5 pilots, neddle clip on mid position, air screw 1-1/2 turns out, when it startd, it doesnt run right, and it missfires, maybe air screw? It has good spark Quote Link to comment Share on other sites More sharing options...
EaCastillo00 Posted June 24, 2017 Author Report Share Posted June 24, 2017 I meant Backfires* Quote Link to comment Share on other sites More sharing options...
JUSTWANNARACE Posted June 24, 2017 Report Share Posted June 24, 2017 Slides in the correct carb with the cut away on the filter side? Did you put the chock crossover tube back in (little black hose in between the 2 carbs? 1 Quote Link to comment Share on other sites More sharing options...
EaCastillo00 Posted June 24, 2017 Author Report Share Posted June 24, 2017 (edited) 15 minutes ago, JUSTWANNARACE said: Slides in the correct carb with the cut away on the filter side? Did you put the chock crossover tube back in (little black hose in between the 2 carbs? Yes i did all that; i also replaced de air screws with some new ones, maybe the new ones arent working appropiately, im thinking about putting the old ones back in, they were working just fine Edited June 24, 2017 by EaCastillo00 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.