jriffe23 Posted August 21, 2014 Report Posted August 21, 2014 Ok working with some spindle mount wheels. Here are the wheels on the spindles. 5/8 spindles by the way. Ok my question is can i buy a grease cap that will fit over the end of the spindle and will go into the tapered part of the wheel? If so im going to that the wheels powdered black and powder the grease cap orange? If not that what are some other ideas? Thanks a lot. EDIT: The measurement of the tapered part is 1 and 3/4 inches Quote
trx510r Posted August 21, 2014 Report Posted August 21, 2014 Theres caps for those wheels bt not ones tht are goin to fit over tht much of the spindle sticking out..caps are like 10bucks a piece from sandtoyz unlimited Quote
jriffe23 Posted August 21, 2014 Author Report Posted August 21, 2014 Thanks man. I can cut the spindles down if needed. They stick out an inch and a half. And on there i can only find the wheels and they come with caps, i cant seem to find just the caps Quote
jriffe23 Posted August 21, 2014 Author Report Posted August 21, 2014 Actually probably use a spacer Quote
trx510r Posted August 21, 2014 Report Posted August 21, 2014 Call john at sandtoyz unlimited tell him u need 2 caps for douglas spindle mounts.. Quote
SOUTHTHIRTY Posted August 22, 2014 Report Posted August 22, 2014 Trailer store... sell cheep caps ... ive seen them work Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.