Jump to content

Recommended Posts

Posted

Good day all, im hoping to get some help with and idle issue.

 

i have a 93 banshee that was running fine until i repaired some leaks on the intake boots and clean the filters. Now the bike will not idle, I need to apply throttle to keep it running.

 

some help would be greatly appriciated, need to get this sorted out before i sell it.

Posted

Make sure the carb slides have the cutaway towards the air filters. If they are swapped, the cutaway ends up towards the motor and it runs like crap.

 

Make sure the choke tube is in place between the carbs and make sure the left float nowl has the brass BB at the front.

Posted

I looked for a tube that was out of place and I found nothing, I did nothing else other remove the intake boots. Carbs only moved enough to get to the boot bolts where they attach to the reed cage.

This is my first go around with a banshee and my last, just need to get idle decent.

 

thanks for the help so far

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...