robert0762 Posted April 1, 2014 Report Posted April 1, 2014 I have what is claimed to be a lonestar swing arm. I bought it a few months back on egay. I go to put it on today and my carrier wont fit in. This is the carrier that came with the arm but it was not installed when I got it. I can spread the split section on the end to get it in but once it hits the solid section in the middle it will not go any further. The swing arm is about .04 in. smaller then the carrier. I even tried another carrier that I had laying around . That one didn't work either. HELP!!!!! Pics carrier measurement swingarm measurment Quote
possum Posted April 1, 2014 Report Posted April 1, 2014 Thats a problem. Does it look like there was ever a carrier installed? I would just get a cut off wheel and slice the center section at the back or slightly underneath so you dont really see it. Quote
possum Posted April 1, 2014 Report Posted April 1, 2014 Or just cut it at the existing cut on both sides.. Quote
robert0762 Posted April 1, 2014 Author Report Posted April 1, 2014 There was a carrier in there but not the one I have Sent from my SCH-I535 using Tapatalk Quote
Starwriter Posted April 1, 2014 Report Posted April 1, 2014 I'm pretty sure that's not a Lonestar swingarm. I'm kinda wondering if it's even a Banshee swingarm. Before you get too carried away, take a bunch of measurements on it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.