bansheecaptain Posted April 28, 2013 Report Posted April 28, 2013 Got a set of new 35 pwk airstrikers and put them on and yhe idle screw fully turned in wont lift the slide enough to idle at all do the make longer ones or is there anything im doing wrong Quote
tdod101 Posted April 28, 2013 Report Posted April 28, 2013 Make sure the throttle cable is letting the slides bottom out. Give it full throttle and let go and you should hear and see the slides clack. (With machine off obviously) if not adjust your cable Quote
dave5.0 Posted April 28, 2013 Report Posted April 28, 2013 How long are the springs behind the screws? Had to cut them down before to get the screws in further. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.